Перейти к основному содержанию
Помощь

iPhone 1st Generation Display Assembly Replacement

Редактирование шага 5 —

Тип шага:

Перетащите чтобы изменить порядок

Working from the edge opposite the battery connectors, insert a spudger between the battery and the plastic frame and pry up on the battery. It is attached to the casing with an adhesive, but should slowly come free.

Leave the battery resting slightly out of its housing, but be sure not to put too much pressure on the battery wires as the solder joints break easily.

Ваш вклад лицензируется под свободной лицензией Creative Commons .

OSZAR »